Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Palm Bay?
Spring replacement in Palm Bay typically costs $180 – $340 for one torsion spring, and most doors need both springs replaced at once, so a matched pair usually runs about twice that. The estimate is set per job, and the written estimate we give you sets the final price. Springs are the part of a garage door that fails most often, and they’re also the most dangerous component on the whole system to handle.
If your door won’t lift, or you heard a loud bang from the garage and now nothing moves, that’s the classic sign of a snapped torsion spring. We answer 24/7 and offer free estimates, so you can get a number before you commit to anything. If you’d rather read the deeper breakdown on how we handle this specific job, see our page on spring replacement.
Key Takeaways
- One torsion spring replacement in Palm Bay: typical estimated range $180 – $340.
- A matched pair (which is what most doors need) runs about twice the single-spring range.
- Extension springs on older doors can land lower, and high-lift or two-door garages can push higher.
- Our technicians have up to 13 years of experience and work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems.
- Free estimates. Call (833) 762-4168 to get one.
Spring Replacement Cost Breakdown (2026)
Here’s the range you’re likely to see in Palm Bay for the pieces of this job. These are typical estimated ranges, not exact quotes. The written estimate we give you sets the final price, and it’ll reflect what we actually find once we look at your door.
| Line item | Typical estimated range (Palm Bay, 2026) |
|---|---|
| Single torsion spring replacement (one spring) | $180 – $340 |
| Matched pair of torsion springs | About twice the single-spring range |
| Spring repair (the broader repair category) | $180 – $340 |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement (worn rollers found during the job) | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if the spring failure damaged a section) | $250 – $500 |
| Opener repair (if the opener was strained or the door stopped triggering it) | $120 – $320 |
| Broader garage door repair (if the job turns into more) | $150 – $600 |
Why the pair matters
Torsion springs on a double-car door are usually installed as a matched pair, and when one breaks, the other is carrying the full weight of a door it wasn’t designed to lift alone. Replacing only the broken one is cheaper today, but the second spring is usually close behind it on the wear clock. Most people end up doing both at once because it’s one visit and one labor charge instead of two. We’ll tell you honestly whether a single replacement makes sense for your situation.
What pushes the number up or down
The biggest drivers are spring type and door weight. A single-car door with one light torsion spring sits at the bottom of the range. A heavier double-car door, a high-lift setup, or a door where the cables and drums are also worn lands near the top. If your opener got strained when the spring let go, that adds a separate repair, which is why opener repair is its own line in the table. And if a panel was dented or bent when the door slammed down, that’s another $250 – $500 at the panel-replacement range.
What Affects Spring Replacement Pricing in Palm Bay
No two garage doors go through the same wear, and the price on your estimate will reflect that. Here’s what typically moves the number:
- Door size and weight. A single-car door takes lighter springs than a double-car door. Heavier doors need larger springs rated for more cycles, and those cost more. This is the single biggest factor in where you land in the $180 – $340 range.
- Spring type. Torsion springs (mounted on a shaft above the door) are the modern standard and dominate the price range. Extension springs (stretched along the tracks, more common on older doors) sometimes come in lower, but they need safety cables and their own setup.
- Age of the door and related parts. A spring rarely breaks in isolation. Cables stretch, drums wear, rollers flat-spot. If those parts are due too, we’ll quote them separately so you know exactly what each line costs rather than rolling it into a vague number.
- How the door is mounted. A standard 7-foot door versus a high-lift door or one with a low headroom setup changes the spring length and the labor involved. Low-headroom setups in particular can take longer to set up safely.
- Free-and-clear access to the door. A garage crammed with stored boxes, or a door with a car parked tight against it, takes more time to safely set up and clear. That’s labor time, and labor is part of the estimate.
- Brand and system type. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and the spring configuration is not always identical between them. Knowing the brand saves time and keeps the estimate tight.
The climate in Palm Bay itself is not the main culprit for spring failure. Springs wear out from cycles, not weather. What does matter locally is that more cycles per year (a busy household, a door that opens five or six times a day) moves a spring toward its failure point faster. If your door gets a lot of daily use, expect a shorter spring life regardless of how the door looks.
Why Springs Fail, and Why You Shouldn’t Touch Them
A torsion spring is a coiled steel part under heavy tension, and it stores enough force to do real damage to hands, arms, and anything in its path when it releases. A snapped spring isn’t a loose screw you can tighten back. This is the one repair on a garage door where we genuinely tell homeowners not to attempt it themselves. The tools are specific, the tension has to be released in a controlled way, and a mistake can injure you badly. We handle this work as a dedicated spring repair service because it takes practice to do it safely.
The safety caveat is worth saying plainly: if your door won’t open because a spring broke, leave it alone. Don’t try to force it up by hand, don’t disconnect the opener to “see if it works” without the spring tension, and don’t reach into the spring mechanism. Call us. We answer 24/7, and we’ll get a technician out with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace? What We Ask Before Quoting
Spring replacement is almost always the right call if the door itself is in decent shape. Springs wear out, and a fresh pair buys you years of smooth operation. That’s what “same door, fixed right” means in practice.
But there’s a point where a door is showing other signs of giving up: cracked or bent panels, rust on the tracks, an opener that’s grinding. When a spring failure is one of several problems, the math can shift toward a new door. New door installation runs $700 – $2,200 as a typical estimated range in Palm Bay, so if we’re looking at a full spring job plus several panel replacements plus track realignment, replacement starts to make sense. We’ll show you both numbers and let you decide. We also handle full installations when that’s the answer, so you don’t need a second company.
How Long Does Spring Replacement Take?
A standard torsion spring replacement on a typical Palm Bay home usually takes about an hour to an hour and a half once the technician is on site. A pair takes similar time, because the setup is the same and both springs go in together. If we find cables, rollers, or a track that also needs attention, add time for those.
Most spring jobs are completed in a single visit. You’ll know the estimate before we start, and the written estimate sets the final price.
How to Save on Spring Replacement
Spring replacement isn’t a job where you want the cheapest bid in town. A bad spring install can damage the door or fail early, and that costs more than doing it right once. Still, there are things you can do to keep the number down:
- Replace both springs at once. A pair is about twice a single spring but nearly always one visit. Paying for two separate service visits over a year usually costs more in total, and you avoid a second failure at an inconvenient moment.
- Get a written estimate before any work starts. Free estimates mean you know the number up front. Call (833) 762-4168 and we’ll walk you through the typical range for your door size and setup over the phone.
- Ask for a repair-first look. If the opener turns out to be fine and the tracks are straight, we’ll tell you. We don’t pad a spring job with parts it doesn’t need.
- Bundle a genuinely worn part found during the same visit. If the cables are at the end of their life anyway, replacing them during the same visit usually costs less than a separate trip. We’ll quote each line separately so you can see what’s what.
- Don’t wait for the second spring to fail. When one spring breaks, the other is usually on borrowed time. Having it checked when we’re already there saves you a second emergency call.
When It’s an Emergency
If your door is stuck open and won’t close, or it slammed down and now won’t budge, that’s a security and safety problem, and we treat it that way. Emergency garage door service is available for time-sensitive failures. When the door won’t move, we do.
Call (833) 762-4168. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Brands We Work On
Because springs aren’t identical across every door, it helps to know the system. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. That range covers most doors we see in Palm Bay, which means you’re not hunting down a specialist for a specific brand. We’re also 100% garage doors, not a side service tacked onto a general handyman business, so our technicians spend their time on this trade specifically.
Related Repairs and Guides
- Palm Bay Garage Door Repair Co – our main page for repairs and installations across Palm Bay.
- Spring replacement – the full rundown on how we replace torsion and extension springs safely.
- Cable repair typically costs $130 – $250 when cables are worn alongside the springs.
- Opener repair runs $120 – $320 if the opener got strained when the spring failed.
- Roller replacement typically costs $110 – $220 for a full set of worn rollers.
- Track realignment runs $120 – $240 if the door shifted when the spring let go.
- Panel replacement costs $250 – $500 per section if a panel was bent or cracked.
- New door installation is $700 – $2,200 if the repair math turns toward replacement.
- Broader garage door repair runs $150 – $600 for jobs that grow beyond the spring.
- Emergency garage door service is available for doors that won’t open or close.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Palm Bay?
Typical estimated cost is $180 – $340 for one spring, and a matched pair runs about twice that. The written estimate sets the final price. For an exact quote on your door, call (833) 762-4168, and estimates are free.
Is it cheaper to repair or replace the springs?
Repairing is almost always cheaper than replacing anything else on the door, because a spring is a part, not the whole system. Replace both springs at once rather than one. If the door also has cracked panels or worn tracks, replacement can be the better value overall, and we’ll quote both options. Call (833) 762-4168 to talk through which makes sense for your door.
Do I really need to replace both springs if only one is broken?
Usually, yes. Both springs were installed at the same time, so they have roughly the same number of cycles on them. When one fails, the other is carrying weight it wasn’t rated for alone and is often close behind. A pair is about twice the single-spring range, and doing both in one visit usually costs less than two separate service calls. Call (833) 762-4168 and we’ll tell you honestly what your door needs.
How much does spring replacement cost if the cables are also bad?
Cable repair is $130 – $250 on its own, and adding it to a spring job usually comes in lower than a separate visit. If both springs and the cables are due, expect the total to land above the pair range. The written estimate will itemize each line. Call (833) 762-4168 for a free estimate on the full job.
Can you come today?
Same-day service is often possible. Our technicians have up to 13 years of experience, and we handle spring failures every week. Call (833) 762-4168 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening.
Get a Free Estimate on Your Spring Replacement
If your door won’t lift or you’ve heard that bang from the garage, don’t force it. Give us a call and we’ll quote the job before anyone touches the door. We offer free estimates and handle spring replacement across Palm Bay, along with cable repair, opener repair, panel replacement, track realignment, and full new door installation when that’s the right call. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so whatever door you’ve got, we know it. Call (833) 762-4168 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Palm Bay Garage Door Repair Co.
Pricing reflects the Palm Bay market as of 2026. Palm Bay Garage Door Repair Co offers free estimates – call (833) 762-4168.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Gabriela Castillo"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Raj Rao"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Todd Sutton